Nurturing the Relationship Between Industry and Regulators

Biopharma must see regulators as partners in their efforts to provide safe and effective therapies.
Dec 01, 2016
Volume 29, Issue 12, pg 22–27

tai11/shutterstock.comBiopharmaceutical companies are in the business of improving the public’s health and quality of life. Regulators and standard-setting organizations exist to both guide the biopharma industry in their endeavors and to ensure public safety. It’s a partnership that can sometimes be contentious but is, ultimately, beneficial to all. 

As the biopharmaceutical market continues to expand globally, international regulators are making an effort to harmonize regulations and standards and to protect the complex supply chain. Biopharma companies are also making an effort to stay compliant with worldwide guidelines in an ever-changing regulatory environment. 
“There is a lot of effort on the part of drug companies to research and make sure they are compliant with the various worldwide manufacturing regulations. For the most part, GMP requirements are rather consistent worldwide,” says Susan Schniepp, distinguished fellow at Regulatory Compliance Associates. “The differences that exist can be managed by applying the strictest requirement to the products that would ensure its acceptance across the globe. Issues may arise when a standard applied to the technology is changed and the new requirement is stricter than its predecessor. Companies need to fully understand their product in the development stage to be able to address the ever-changing regulations.” 

Regulators, government agencies, and standard-setting organizations can be the catalyst for the development of new and innovative therapies as a response to world health crises, and there are a variety of ways industry can get involved with these initiatives. “There are many trade organizations that offer workshops and conferences that address some of the unmet medical needs facing the global community. Companies should make sure they are on the mailing lists for these organizations so they can receive notice of upcoming conferences and choose the ones that seem most pertinent to their business. These conferences not only [provide] cutting-edge information, but they also offer an opportunity for people to network and discuss issues and potential solutions to them,” says Schniepp.

Manufacturers must navigate the regulatory waters to ensure their products meet the proper requirements. In the following sections, industry experts give advice about getting involved with standards development, improving the product approval process, preparing for inspections, and responding to regulators. 
 

Developing standards 


Industry standards and monographs, such as the United States Pharmacopeia and the European Pharmacopoeia (Ph. Eur.), can help pharmaceutical manufacturers get their products approved by regulatory bodies and into patients’ hands. According to a US Pharmacopeial Convention (USP) spokesperson, “USP’s public standards can help facilitate the application process by establishing standards that sponsors reference in applications and licenses to demonstrate the quality, purity, and strength of their drug products.”

And international standard-setting organizations emphasize the importance of industry input. USP encourages pharma companies to participate in the development of public standards. Susanne Keitel, director of the European Directorate for the Quality of Medicines and Healthcare (EDQM), which is in charge of the Ph. Eur., would like to see industry become more active in the development of pharmacopeial standards, such as nominating experts to participate in developing standards. Keitel states, “The knowledge and experience of experts from pharma companies is crucial to ensure robust, state-of-the art, validated, and affordable test methods and monographs … and relevant standards worldwide. No pharmacopeia could do without the contributions of and collaboration with industry.”

USP’s Global Health Monographs program addresses treatments for major health concerns, such as malaria, or unmet needs in underserved communities outside of the United States. Pharmaceutical companies can help by donating specifications and materials. Working with USP on pending monographs is another way industry can get involved. “These are monographs or monograph revisions for certain substances that have been submitted or are intended to be submitted to FDA for approval but have not yet received approval.  By approaching USP early in the process, USP can more readily close the gap that otherwise might exist between FDA approval and the publication of an applicable USP monograph,” says a USP spokesperson.
 

Getting a product approved

Researching and developing a pharmaceutical product for eventual manufacture and distribution is a long and expensive process, and regulations play a prominent role. By working closely with regulators, pharma companies can make the product-approval process smoother. “The approval process can be improved when sponsors work hand in hand with regulatory agencies during the approval process, answering reviewers’ questions as they arise and providing timely information regarding manufacturing processes and quality control strategies,” says Russell Madsen, president of The Williamsburg Group. 

“In my opinion, sponsors can be more open with FDA during the development process,” says Mukul Agrawal, PhD, president MA Pharmaceutical Consulting and member of the Bioequivalence Focus Group steering committee at the American Association of Pharmaceutical Scientists (AAPS). “There are apprehensions about how FDA will perceive that and what if FDA asks for something unreasonable? To the contrary, FDA is helpful and appreciates the efforts of sponsors in doing things right and according to FDA’s expectations. While there is a need for balance in these interactions, it is better to maintain open communication with FDA. It is also possible to have a dialog with FDA about their expectations, and if data can be provided to support justification for doing something differently, it should be discussed and agreed to with them,” says Agrawal. 

Not providing enough information about manufacturing and control strategies can complicate FDA’s evaluation of a drug product, according to Madsen. “Not providing information in the proper format (e.g., electronic common technical document [ECTD]) and providing insufficient or incomplete information …  not responding in a timely fashion to requests for additional information or answering questions posed by regulatory agencies [are mistakes companies make],” says Madsen.

Knowing what’s expected by the regulatory agency is key. “The most frequent mistake in my opinion is that the companies find out too late in the process that some things were not done according to FDA expectations as described in the various guidance documents and then try to use a Band-Aid approach. It is important to have input from all departments within the company from the earliest stages of development to prevent mistakes,” says Agrawal.
 

Regulatory inspections

One of the important tasks that most regulatory agencies worldwide perform is facility inspections. Companies that operate in the United States or import products into the US are inspected by FDA. An FDA spokesperson states, “During an FDA inspection, investigators are seeking to verify that facilities are operating in a state of sufficient control according to current good manufacturing practice (CGMP) guidelines.” 

Companies that operate worldwide should be aware of the various regulations and what international inspectors might be looking for during an inspection. “Although there is a common approach for regulatory inspections by all agencies that are members of the Pharmaceutical Inspection Co-operation Scheme (PIC/S) in the US, EU, and Asia, their focus and expectations may differ. For example, some agencies might look more closely at pest control, whereas others may be more concerned with adherence to local pharmacopeias. In addition, agencies such as the US FDA will investigate potential criminal conduct, while other agencies verify compliance with the regulations,” says Siegfried Schmitt, principal consultant at PAREXEL. 

Facility inspections by regulators may cause anxiety for pharmaceutical companies, but being prepared can make the process pain free. “The best way to prepare for an inspection, whether it is in the US, EU, or Asia, is to know your operations, understand your quality system, understand your investigations, and follow your standard operating procedures (SOPs),” says Schniepp. Personnel should be prepared and relaxed and, according to Schniepp, employees should not “change their behavior to accommodate the regulators.” An FDA spokesperson concurs, “To prepare for an FDA inspection, facilities should review the CGMP guidelines and assure they are in compliance with those guidelines. FDA offers several resources to help facilities better understand and adhere to CGMP guidelines, such as public outreach through presentations at national and international meetings and conferences to explain the CGMP requirements and latest policy documents.”

According to David Lerner, life-sciences expert with the PA Consulting Group, there are a variety of things biopharma companies can do when preparing for a regulatory inspection, including having good controls, processes, training, and systems up front. “There is simply less preparation effort if the company is in a good compliance state,” Lerner says. 

Chris Moreton with FinnBrit Consulting agrees, “[Companies should] make sure everything is done correctly day in and day out. Make sure that the SOP system covers all the activities needed to undertake the type of manufacturing operations at the site.” 

Schniepp agrees that preparation is key. “The biggest mistake companies make is not being ready for an inspection. The best rule of thumb to follow is to be ‘audit ready all the time’.”

Madsen suggests performing internal audits prior to an inspection by regulators. “Internal audits … may be helpful in identifying areas that may pose problems during the inspection,” says Madsen. Practice audits can challenge logistics and allow personnel to go through an ‘inspection’ without the pressure of an official inspection, according to Schniepp. “You want [personnel] comfortable and unflustered when the regulators are viewing them performing their jobs or asking them questions about their job functions. During the actual investigation, the best way to make the impact on your employees pain free is to make sure you talk to them before they enter into the inspection room or before they are to be observed by the inspectors. This is not to coach them on what to say but rather to calm them down before they are observed or questioned by the inspector so they can interact in a positive way with the inspector,” she says.

Companies should also identify and address risks prior to inspections, according to Lerner. “Knowing your risks allows you to better prepare for inspection questions. You also need to be seen as addressing the risks that you have found,” he says. 

Companies should plan the logistics of an inspection including the location for the inspection, personnel escorts and contacts, and preparing any communications or documents the inspectors might require. According to Schniepp, inspectors may want to see “a copy of the current organizational chart, a copy of the titles of your SOPs, a list of your corrective actions and preventive actions (CAPA)/investigations, and a list of your complaints. The rule of thumb is to go back approximately two years for the CAPA/investigations and complaints.” Addressing findings from previous inspections is also imperative. “Inspectors review previous inspection reports and expect that prior commitments have been completed,” says Lerner. Most importantly, any documents the inspectors ask for should be provided in a timely manner. “Bottom line, the sooner you get the regulators the information they want, the sooner they will be able to wrap up the inspection. If you are organized and forthcoming in your information, your inspection will go much smoother,” says Schniepp.

Lerner suggests that companies may benefit from providing inspectors with an overview of their facilities and processes. “Recognize that the inspector is dropping into your environment with little context. By providing them with the context, they will be better able to understand what you do and ask better questions.” Lerner recommends using storyboards to describe processes, situations, or decisions. “Storyboards are useful because they help the inspector understand the situation rather than forcing the inspector to pull information from one or more documents,” says Lerner.   

While preparation may be key, there are obvious things companies should avoid doing during an inspection, such as lying, being evasive, or arguing with inspectors. “The inspector will want direct answers to direct questions and to talk to the people doing the job, not management,” says Lerner. The regulatory investigator is there to ensure GMPs are being followed, and avoiding the inevitable may make things worse. “Sometimes companies try to hide situations from investigators or provide misleading answers.  A good investigator usually asks the same question in different ways and in multiple areas and will uncover misleading or untrue answers,” says Madsen.
 

Addressing the concerns of regulators 

Responding to violations observed during an inspection is equally important. “Respond quickly but thoughtfully. For a 483, point out any situations that the investigator may not have fully understood.  It’s best to clarify and resolve these during the inspection, if possible, before they are put in writing,” says Madsen.
Lerner suggests that companies take FDA 483 observations seriously, but be careful not to overcommit. “When the inspector returns, they expect the commitments to be completed and could escalate actions if not completed.” Systemic corrections should be put in place, says Schniepp. She advises that companies “make sure you address how you are going to maintain a compliant status once the change has been implemented.” Moreton suggests that companies have a plan for any violations that cannot be immediately fixed. 

Addressing root causes of observed violations is key, according to Lerner. “The agency really wants to see that you are addressing the root cause and that you are addressing this issue across the organization. As an example, if the inspector found that a particular non-conformance (NCR) was not investigated fully, it is equally important to both explain what happened in that instance (and why you made specific decisions) and what you are doing to prevent future insufficient NCR investigations.”

Properly addressing violations cited by investigators on a FDA 483 form may help companies avoid receiving a warning letter from FDA. When FDA does send a warning letter, companies should take their response seriously. “The warning letter itself is an indication that the company has been out of compliance for some time and has been unsuccessful in solving their compliance issues. Probably the most conservative response to a warning letter is to outline your plans to improve your quality system and commit to bringing in an unbiased third party (consultant) to review and make sure your plans are executed appropriately and will eliminate your systemic quality problems. If you are at the warning letter stage, it means you have been unable to solve your problems and you need help. Make sure you communicate this in your response,” says Schniepp. This advice rings true. In recent warning letters, the agency has often suggested a company obtain outside consultation in resolving GMP violations.

 

The regulatory relationship continues

Ensuring the safety and efficacy of medicines doesn’t stop when the drug is approved by regulators and distributed to the public. Inefficient manufacturing practices, GMP violations, negligence by ingredients or service suppliers, and other complex issues can all have an impact on the safety of a drug product. Both industry and regulators have a continued responsibility to ensure the safety of patients. 

One aspect of pharma’s part of this responsibility is keeping regulators informed of any adverse events associated with a drug product. FDA states that pharmaceutical companies that “market prescription and nonprescription drug and biological products in the US must review all adverse event information they obtain or otherwise receive from any source, and report adverse events to the FDA’s Center for Drug Evaluation and Research as described under the regulation or section of the Food, Drug, and Cosmetic Act that is applicable to the type of product they market,” according to an FDA spokesperson.

“Adverse event reporting is a serious matter and should not be taken lightly,” says Schniepp. A well-managed and properly staffed pharmacovigilance unit is key, according to Moreton. “[The unit should have] clearly defined responsibilities and report in to the senior management (not sales and marketing),” says Moreton.
“Companies should report adverse events within the deadlines established by the regulatory authorities. When in doubt, it is better to be conservative and report by the earlier of multiple deadlines. Providing complete and accurate information is important as is maintaining complete and accurate records. It is best to initiate the process for adverse event reporting as soon as the company becomes aware of it to prevent any delays in filing,” says Agrawal. Schniepp agrees, “The most common mistake is waiting too long to report the event. Many companies are tempted to wait until they have completed the investigation into the event before reporting its occurrence.”

FDA is clear on adverse event reporting. “These entities must ensure that the adverse event reports they submit to FDA are transmitted in an electronic format the FDA can process, review, and archive.  In addition, these entities must have written procedures for the surveillance, receipt, evaluation, and reporting of postmarketing adverse event to FDA as well as keep records of all known adverse event information,” states an FDA spokesperson.

 

Conclusion

Regulatory agencies should be used as a tool to help manufacturers develop and market their products and regulators and their regulations should not be feared or avoided. Being mindful of regulatory requirements before and during development will make the regulatory approval process smoother, and maintaining GMPs and having well-trained personnel will ease the stress of regulatory inspections. 

It is clear that both industry and regulators have the same ultimate goal: provide safe and effective treatments to people who need them. Understanding and nurturing the industry-regulator relationship fosters innovation and ensures patient safety worldwide.

 

Article Details

BioPharm International
Vol. 29, No. 3
Pages: 22-27

 

Citation

When referring to this article, please cite it as S. Haigney, "Nurturing the Relationship Between Industry and Regulators," BioPharm International 29 (12) (December 2016).

 

native1_300x100
lorem ipsum