Emerging Bioprocessing Methods - New technology is designed to improve production efficiency by taking advantage of the properties of single-use bags. This article is part of a special issue on Single

ADVERTISEMENT

Emerging Bioprocessing Methods
New technology is designed to improve production efficiency by taking advantage of the properties of single-use bags. This article is part of a special issue on Single-Use Technologies.


BioPharm International Supplements
pp. s8-s14

Single-use technology for bioreactors has come a long way during the past 25 years, yet some of its capabilities remain to be exploited. Equipment manufacturers have adopted the technology as if it were an evolutionary step, but it is, in fact, revolutionary. Current offerings in single-use technologies often are not presented this way, however.

Single-use bioreactors currently follow one of two general formats. In one of these, the single-use components are used as linings for stainless-steel tanks. In a second model, a flexible bag is affixed to a rocker system that helps aerate and mix components inside the bag (1–3). Both of these models limit the value of single use systems, however.

Equipment manufacturers conduct extensive exercises to chart the future of bioprocessing methods, but the real judge of what is needed is the consumer. The development of large-scale bioreactors for the manufacture of commercial quantities of monoclonal antibodies and vaccines at an affordable cost and with a short development time would fill an unmet need. Therapeutic Proteins is looking at ways to meet this demand by incorporating a comprehensive bioprocessing unit capable of upstream and downstream processing inside a single bag without any moving parts. The company has filed or received dozens of US and worldwide patents for these inventions. In this way, the company hopes to spur the further evolution of single-use technologies.


Figure 1: A 400-L bioreactor for bacterial fermentation used by Therapeutic Proteins to manufacture filgrastim.
In this new unit, mixing is achieved by gentle pressing on the bag to create a wave. Figure 1 shows a bioreactor with a flapper that pushes down on the bag to create a wave motion inside the bag. The bag itself lies flat and does not move. The Navier–Stokes equations describe the motion of fluid substances, such as liquids and gases (4). These equations state that changes in the momentum (i.e., force) of fluid particles depend only on the external pressure and internal viscous forces (which are similar to friction) acting on the fluid. The equations also describe the balance of forces acting at any given region of the fluid. A force applied to any portion of a fluid would thus be transferred to the rest of the fluid (4). A flexible bag never needs to be shaken or rocked. All that is needed is to apply a minimal force, a pressure on any part of the bag, to start the motion of liquid. Rocking and shaking technologies generally fail to account for the physical constraints on the amount of stress that can be applied to the bag. Bags used in the rocking model cannot hold more than 500 L of media because the bag would break when rocked at a larger size.


blog comments powered by Disqus

ADVERTISEMENT

ADVERTISEMENT

Lilly to Acquire Novartis Animal Health
April 22, 2014
Novartis and GSK Trade Assets
April 22, 2014
Mallinckrodt to Acquire Questcor Pharmaceuticals
April 16, 2014
EMA Warns of Falsified Herceptin Vials
April 16, 2014
American CryoStem and Rutgers University File Joint Patent on Stem Cell Platform
April 11, 2014
Author Guidelines
Source: BioPharm International Supplements,
Click here