Outsourcing Laboratory Work—Establishing the Necessary Policies and Practices - The outsourced service provider should be considered as an extension of your own laboratory. - BioPharm

ADVERTISEMENT

Outsourcing Laboratory Work—Establishing the Necessary Policies and Practices
The outsourced service provider should be considered as an extension of your own laboratory.


BioPharm International Supplements


The Process Flow Model


Figure 2. A process flow model for testing laboratories
Understanding how a laboratory's workflow takes place, where data comes from, how information is processed and stored, and how data is entered into the LIMS, will give you a basis for deciding how the results of testing from an outsourced testing services can be integrated into your laboratory's systems. Figure 2 shows the workflow in a testing laboratory along with the entry points for test results and new analytical protocols. The ovals represent databases and the arrows are processes used to carry out a stage in the test protocol. Starting at the top, a document management system contains test method protocols and supporting documents (hazardous materials, etc.). Test methods are implemented in the measurements and experiments process and would include sample preparation and chromatographic work in Figure 1. All of the steps in Figure 1's chromatographic data station are shown in the grey box in Figure 2 as the detector signal is measured and stored in the instrument data set. The data stations analysis software processes the chromatographic data and the result is entered into the LIMS. Data and results from external sources (ES) can enter the system in three places, allowing outsourced laboratory work and method development to be integrated into the laboratory's operations.

A comparison of Figure 1 and Figure 2 shows:

1. Analysis protocols would be contained in the knowledge database.

2. The sample preparation, chromatographic separation, and data acquisition steps are part of the measurements and experiments process.

3. The acquired data are stored in the data station's database structure, which would also contain any processed data (peak retention time, size, etc.).

4. The results of the assay are entered into the LIMS.

Other analytical protocols would have their own measurement and experiments processes. Each instrument type would have its own database structure, so that the laboratory's overall instrument data system would comprise several databases, one for each type of instrument.

This chart represents only a basic model workflow. Because the specific steps and flow at each laboratory may vary, it is important for the two laboratories to resolve ahead of time any differences that could pose a problem.

Outsourcing Method Development

The considerations for outsourcing method development work are similar to what we've just discussed. All of the validation and regulatory issues apply to the outsourced company just as they would if the work were done in your own facility. In addition, the following need to be kept in mind:

  • Who owns the test method? Don't assume that simply because you paid for the work you have complete control over the rights to work. Ownership should be defined in the contract.
  • Incorporating the method into your workflow will require training. If those developing the method use equipment that is similar to what you have in the laboratory, but from a different vendor, determine if any systematic differences can affect the results. Does a particular instrument have a difference in sensitivity or control that is critical to the successful implementation of the procedure?
  • Consider how to integrate the testing protocol. Are there any problems integrating the new protocol into your laboratory's workflow, including updates to the LIMS, for keeping track of tests?
  • Hardware and Software: If the new method required the development or modifications of hardware or software, are the rights transferable to you? Is the actual equipment yours or do you have to purchase a duplicate set and re-implement the modifications? Does the company that developed the modifications have plans to convert them into a product? What considerations does your company get for its investment?

Outsourcing Systems Development

When outsourcing systems development, it is essential to know whether the outsourced project is a completely new development or a modification to an existing software. A successful automation project should include the following:


blog comments powered by Disqus

ADVERTISEMENT

ADVERTISEMENT

Lilly to Acquire Novartis Animal Health
April 22, 2014
Lilly to Acquire Novartis Animal Health
April 22, 2014
Novartis and GSK Trade Assets
April 22, 2014
EMA Warns of Falsified Herceptin Vials
April 16, 2014
Mallinckrodt to Acquire Questcor Pharmaceuticals
April 16, 2014
Author Guidelines
Source: BioPharm International Supplements,
Click here