Lifetime Studies for Membrane Reuse: Principles and Case Studies - - BioPharm International

ADVERTISEMENT

Lifetime Studies for Membrane Reuse: Principles and Case Studies


BioPharm International
Volume 21, Issue 9


Figure 1. Data from membrane reuse studies for prospective validation: A) normalized water permeability; B) step yield; C) endotoxin levels; and D) conductivity at retentate end
Product yield and purity are often monitored to ensure that product degradation is not induced by repeated use of a membrane. For cases when the filtration step is used for clearance of host cell and process-related impurities, it is important to monitor clearance at appropriate intervals during reuse studies. Such monitoring can help ascertain whether the efficacy of the clearance step is undermined by reuse.

Examining filter integrity can identify problems such as macroscopic holes in the membrane, cracks in the seals, or improperly seated modules, which can lead to product leakage and loss, or unsatisfactory clearance of impurities. A variety of methods like air diffusion tests are available for this purpose.

Transmembrane pressure (TMP) is the force by which the liquid moves through the membrane. The TMP-versus-flux curve often serves as a qualitative indicator of the performance of a membrane step. A carryover of product or impurities often results in decay of the TMP-versus-flux curve. Spectroscopic methods such as Fourier-transform infrared (FTIR) and Raman spectroscopy can be used to analyze the membrane post-use to quantify the buildup or absence of protein.


Table 1. Results from the scale-down modeling and qualification
Performing periodic blank runs at appropriate intervals is a common method used to evaluate cleaning efficacy and potential for product carryover. In a blank run, the membrane step uses load material that does not contain any product, and the resulting pool is analyzed for product-related or other impurities. Analytical techniques often used for this purpose include high-performance liquid chromatography (HPLC) assays, product-specific enzyme-linked immunosorbent assays (ELISA), sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) assays, and total organic carbon (TOC) analysis.

APPROACHES FOR ESTABLISHING MEMBRANE REUSE

Concurrent validation and prospective validation are two widely accepted approaches for establishing membrane lifetimes. 2,3

Concurrent validation involves performing cycling studies solely at large scale. Carryover and performance are assessed at preset frequencies, and a determination is made on the acceptability of membrane reuse. Lots manufactured in the meantime are quarantined and released once the carryover and performance data have been reviewed and found acceptable. For example, to establish 100 reuses at large scale, a strategy could be to evaluate carryover and performance data for every 10 runs, and to release all 10 lots after the evaluation is complete and successful, including the blank run performed after the tenth lot.


blog comments powered by Disqus

ADVERTISEMENT

ADVERTISEMENT

Compounding Pharmacy Issues Recall, But Challenges FDA Decision
July 22, 2014
AbbVie's Acquisition of Shire Could Save $8 Billion in Taxes
July 21, 2014
AbbVie to Acquire Shire for $54.7 Billion
July 18, 2014
AstraZeneca Reveals Design for New Global R&D Center and Corporate Headquarters
July 18, 2014
Particulate Matter Prompts Baxter's Recall of IV Solutions
July 17, 2014
Author Guidelines
Source: BioPharm International,
Click here