Downstream Process Optimization Opportunities Using On-Line and At-Line PAT Instrumentation - Technologies for downstream process applications continue to emerge as the PAT initiative is fully impleme

ADVERTISEMENT

Downstream Process Optimization Opportunities Using On-Line and At-Line PAT Instrumentation
Technologies for downstream process applications continue to emerge as the PAT initiative is fully implemented into biotechnology manufacturing.


BioPharm International


Existing State of the Art

The primary analysis requirement in biotechnology downstream processing is molecular identification and quantitation; used to identify and quantitate the product to determine its purity after separation from its production matrix by process liquid chromatography. Therefore, the most powerful and useful analytical techniques to consider for downstream processing in the PAT context are spectroscopy and analytical scale separation methods that can characterize analytes on a molecular basis. A typical downstream process scale chromatographic technique not only purifies but concentrates the analyte and is operated at high load factors and high flow rates, therefore, the associated analytical technique must have a wide dynamic range and a fast cycle time. Typical cycle time requirements for on-line downstream assays are under 15 min, with many under 10 min. This cycle time requirement plus the need to separate, characterize, and identify the desired product in an often complex matrix composed of chemical species similar to the desired product, requires precise, high speed, purpose-designed instrumentation characterized by high accuracy, reproducibility, and resolving power. This combination of requirements limits the discussion of applicable downstream biotech PAT instrumentation to near infrared spectroscopy (NIR) and other specialty optical spectroscopy techniques, such as mass spectroscopy, liquid chromatography, and electrophoretic techniques.

NIR has enjoyed some success in pharmaceutical manufacturing operations, primarily in blending and formulations of dry bulk materials. Its use in on-line downstream processing applications for identification and quantitation of product is less established, but its possibilities should not be overlooked. Practical on-line NIR analyses for biotechnology applications have been demonstrated.6 Factors that will control use of NIR for downstream process applications include probe design and placement, calibration methodology, and heavy reliance of NIR on statistical analysis to calibrate and report concentration and identity of analytes. In many applications, a major advantage of NIR is non-contact. In these applications, the spectrometer is not in physical contact with the sample and, therefore enjoys long and reliable operation. In the case of a downstream process application however, the spectrometer samples the analyte by inserting an optical probe into a product transfer line at an appropriate sample point. This has the advantage that the sterility of the downstream system is maintained and that there is no physical withdrawal of sample from the process line. However, with the probe in direct contact with the fluid sample matrix, proper orientation and maintenance of this probe is critical to the technique's success. Fouling resulting from deposition of biological material on the probe quickly renders the measurement unusable. Furthermore, the low frequency characteristics of the spectra produced in NIR requires heavy reliance on calibration by multivariate solution of simultaneous equations. The sample and its matrix must be fully characterized and non-variate for the calibration to remain valid. This is not a simple task in a complex sample and matrix characteristic of biotechnology production. The speed and simplicity of instrumentation do, however, make it appropriate for consideration for downstream process applications and early applications of this technology appear promising.

Mass spectroscopy (MS) is a powerful and well appreciated tool, finding broad acceptance in a number of non-traditional applications including biotechnology. For example, mass spectrometers have been installed and used in upstream applications for measurement of headspace gas analysis in cell culture and fermentation reactors, to monitor O2 and CO2. Mass spectrometry can be used to determine absolute analyte identity and for quantitation—both desirable attributes. It is rapid and has high resolving capability. In downstream processing, a mass spectrometer could however, acquire a sample stream from an automated sample port or sampling system at the appropriate point in the process stream. Mass spectrometer applications in a downstream process are effectively prohibited by typical high salt content found in many biotech process streams. All known commercial fluid interfaces for mass spectrometers are characteristically intolerant of salt content in the fluid stream. Development of a successful salt resistant or salt remediating interface would open downstream processing to the power of MS. This would appear to be the primary and only limiting factor in successful, robust application of MS in biotech process applications, notwithstanding the high acquisition and operating cost of a mass spectrometer.


blog comments powered by Disqus

ADVERTISEMENT

ADVERTISEMENT

FDA Extends Review of Novartis' Investigational Compound for Multiple Myeloma
November 25, 2014
Merck Enters into Licensing Agreement with NewLink for Investigational Ebola Vaccine
November 25, 2014
AstraZeneca Expands Biologics Manufacturing in Maryland
November 25, 2014
GSK Leads Big Pharma in Making Its Medicines Accessible
November 24, 2014
IMS: Global Spending on Medicines to Rise 30% by 2018
November 24, 2014
Author Guidelines
Source: BioPharm International,
Click here