Laboratory Equipment Validation and the Importance of a Manufacturer - - BioPharm International


Laboratory Equipment Validation and the Importance of a Manufacturer

BioPharm International

As with any other equipment, it is important to work with the water purification system manufacturer to determine the appropriate qualification protocols, how to carry them out, and an appropriate requalification schedule. The manufacturer's knowledge can be crucial, especially if they have developed specific documentation to assist with validation procedures. In addition to meeting cGMP requirements, this documentation also should be applied to each qualification stage and offer users comprehensive help in conducting system qualification.

The engineers who deploy system qualification protocols should be trained in validation procedures and familiar with production processes and regulatory requirements in the pharmaceutical industry. Furthermore, preventive maintenance helps ensure that the water purification system is kept in optimal condition and prevents down-time.

Validation Parameters Since the system qualification begins at the design stage, it is important to have a qualification team involved in the development of all new systems. This enables the manufacturer to incorporate the pharmaceutical requirements for system design and specifications.

An important parameter to be considered for the qualification of water purification systems is the calibration of measuring instrumentation. The product water should be monitored continuously for conductivity and, if required, total organic carbon (TOC) levels using calibrated instrumentation. Water purification systems should be designed specifically to meet USP 28 <643> and <645> suitability test requirements for TOC and conductivity respectively. Also, as recommended by FDA, system alerts should be implemented to warn users if the system is performing outside the pre-determined specifications. Additionally, systems manufactured in an ISO 9001/ISO 14001 certified plant permit good traceability. Certificates of Conformity, Certificates of Quality, and Certificates of Calibration also should be available.

The USP specifies that operational qualification protocols be performed on-site after the system has been installed to meet USP validation requirements.

Conclusion Equipment validation is essential. Determining what equipment needs validating starts with ascertaining the requirements of the end user. It then proceeds to a risk analysis with careful attention paid to regulatory requirements. Careful choice of an equipment manufacturer that offers a comprehensive validation services program, incorporating specially-trained personnel, on-site qualification protocols, calibrated measuring instrumentation, and the relevant documentation in accordance with GMP requirements can facilitate the validation process and overall regulatory compliance.

Sean Murphy is worldwide validation product manager for the Lab Water Division of Millipore Corporation, Bote Postale 307, 78054 St. Quentin en Yvelines Cedex, France, (33)1.3012.7232,

blog comments powered by Disqus



Bristol-Myers Squibb Announces Agreement to Acquire HER2-Targeted Cancer Treatment
October 29, 2014
Amgen, Sanofi, and Ono Pharmaceuticals Partner with Universities on Transmembrane Protein Research
October 28, 2014
Yale and Gilead Extend Sequencing Initiative
October 28, 2014
Contract Research and Manufacturing Organization Paragon Bioservices Raises $13 Million
October 28, 2014
Novartis Sells Influenza Vaccine Business to CSL for $275 Million
October 27, 2014
Author Guidelines
Source: BioPharm International,
Click here