Comparing Fed-Batch Cell Culture Performances of Stainless Steel and Disposable Bioreactors - A case study to compare the performances of several types of mixing in disposable bags with stainless

ADVERTISEMENT

Comparing Fed-Batch Cell Culture Performances of Stainless Steel and Disposable Bioreactors
A case study to compare the performances of several types of mixing in disposable bags with stainless steel bioreactors.


BioPharm International


ABSTRACT

Single-use bioreactors are commonly used for seeding stainless steel bioreactors or for producing material. The profitability of this equipment has been well demonstrated for more than a decade, but few data on their scalability are published. In May 2010, Merck Serono Biodevelopment began a study to evaluate the performances of disposable bioreactors. Because different technologies were available, this study compared performances of several types of mixing. The evaluation was performed both for seeding application and for clinical material production. This study featured 20–50 L disposable bioreactors with gas flow-rate scaled-down from seeding and production bioreactors. A fed-batch process producing a highly glycosylated molecule was performed twice in four types of disposable bioreactors. The quality of the molecule together with molecule concentration and cell growth were compared among the three single-use technologies. These process performances were also compared to 250 L and 1,250 L bioreactors and to a 3.6 L glass development bioreactor. These comparisons allowed Merck Serono Biodevelopment to conclude on their uses and on the scalability (up and down) of these disposable systems. This study was completed by a characterization of liquid–liquid and gas–liquid transfers inside each disposable bioreactor to estimate their potential in terms of cell culture.


(Merck Serono Biodevelopment)
To decrease sterilization, cleaning workload, and reduce costs, the disposables market has been diversified to meet the needs of the biotechnology industry. At Merck Serono Biodevelopment (MSB), bags, tubing, and disposable cell culture containers commonly are used in production processes. Hybrid processes with stainless steel bioreactors, however, remain because a lot of factors have to be considered before implementing such technologies. Besides supplier support and quality, one critical point is the scalability of these bags. Of course it is easier when you design a new plant, but when you have existing stainless steel manufacturing bioreactors and you want to increase your capacity and produce material in disposable bioreactors, comparability and scalability between bioreactors could be a problem. From May to September 2010, MSB performed a study to evaluate and compare performances of different disposable bioreactors. Various equipment models are available on the market, so the options were sorted based on maximum working volume, mixing technology, current good manufacturing practice compliance, availability, data published, supplier experience, and internal requirements. To test different mixing principles, the following technologies were evaluated: ATMI-Pierre Guerin single-use bioreactors; orbital shaking and stirred mixing, both from Sartorius. Processes performed with this equipment began with a growth phase to evaluate bioreactor seeding performances, followed by a fed-batch process producing a high glycosylated antibody-like molecule, to evaluate the impact of culture in disposable bioreactors on molecule quality. Performances were compared to process development bioreactors and manufacturing bioreactors. The evaluation finished with a characterization of transfers by KLa, mixing time measurements, and temperature mapping.

MATERIAL AND METHODS

Cell culture was performed twice in each disposable bioreactor under the same conditions.

Cell Culture

A vial of Chinese hamster ovary (CHO) cells was thawed in commercial medium in a static container. Cells were expanded every two or three days in agitated containers until reaching 8.6.109 cells.

Cell Growth in Disposable Bioreactors

A sterility test was performed at 37 C in each disposable bag two days before inoculation. The cells were then inoculated in parallel in all disposable bioreactors at the minimum working volume provided by the supplier. Growth was then observed for two days. Working volume was increased to the maximum working volume at the same cell density between bioreactors. Cell growth at maximum working volume lasted three days.

Temperature was regulated at 37 C. Stirring speed was fixed by the supplier.

Oxygen was regulated at 50% only with oxygen at a flow rate scaled-down from MSB 250 L seeding bioreactor for paddle and stirred mixing bioreactors and at a flow rate fixed by the supplier and MSB according to its experiences with the orbital shaking bioreactor.


blog comments powered by Disqus

ADVERTISEMENT

ADVERTISEMENT

Bristol-Myers Squibb and Five Prime Therapeutics Collaborate on Development of Immunomodulator
November 26, 2014
Merck Enters into Licensing Agreement with NewLink for Investigational Ebola Vaccine
November 25, 2014
FDA Extends Review of Novartis' Investigational Compound for Multiple Myeloma
November 25, 2014
AstraZeneca Expands Biologics Manufacturing in Maryland
November 25, 2014
GSK Leads Big Pharma in Making Its Medicines Accessible
November 24, 2014
Author Guidelines
Source: BioPharm International,
Click here