PQRI Case Study: Facility Biocontainment and Inactivation - A Risk-Management Case Study. - BioPharm International

ADVERTISEMENT

PQRI Case Study: Facility Biocontainment and Inactivation
A Risk-Management Case Study.


BioPharm International
Volume 25, Issue 2, pp. 50-52

When a manufacturer produces two or more drug substances in the same manufacturing facility, the facility is considered to be multiproduct. The facility designs, operations, and controls related to the use for multiple products should provide for appropriate measures to prevent cross-contamination between products. These controls include the containment procedures used to prevent the release of hazardous agents within the facility.

There are numerous facility design and operational attributes that may significantly affect the quality of products being manufactured. These attributes include, but are not limited to, area classifications, open versus closed processing, utility-system design, cleaning validation/clean-in-place systems, rules regarding equipment sharing, and critical flows throughout the facility. Facility designs and operations should provide for appropriate segregation of products to prevent cross-contamination. For facilities with multiple products or processes, the impact of potential process or product failures on the other operations in the same facility should be evaluated.

The following case study on facility biocontainment and inactivation is part of a series put together by the Product Quality Research Institute Manufacturing Technical Committee (PQRI–MTC) risk-management working group. The series, available on http://www.pqri.org/publications/index.asp, is meant to advance the understanding and application of the International Conference on Harmonization (ICH) Q9 Quality Risk Management guideline by providing actual examples of risk-management assessments used by the bio/pharmaceutical industry.

In this case study, two existing manufacturing suites were proposed to be remodeled to accommodate and contain manufacturing operations involving bacterial fermentation through viable cells of Streptococcus pneumoniae, a pathogenic Biosafety Level 2 (BL2) organism. These suites were separate manufacturing areas located adjacent to mammalian cell culture manufacturing-processing areas. Regulatory guidance requires BL2-Large Scale (LS) waste and residues to be inactivated prior to exiting the manufacturing area (3). An inactivation autoclave was identified during the initial risk assessment as one of the primary means of inactivation of BL2 waste and process equipment prior to exiting the fermentation suite. The risk-review step in the risk-management process identified that there was only one inactivation autoclave in the fermentation suite and that alternative backup inactivation procedures were desired to maintain continuity of manufacturing operations during autoclave preventive- and corrective-maintenance activities.

This case study describes the evaluation of various backup inactivation procedures for operational feasibility and includes a demonstration of an appropriate level of inactivation of the BL2 waste and equipment.

RISK QUESTION AND RISK-ASSESSMENT METHOD

The risk question developed for the subject case study is: What are the appropriate backup inactivation methods (i.e., procedures) that are operationally feasible and provide an appropriate level of decontamination capability that can be utilized in the fermentation suite to inactivate BL2 waste and equipment when the inactivation autoclave is unavailable?

Selection of a backup inactivation procedure is a precise exercise requiring an objective evaluation of the effectiveness of proposed procedures at inactivating the BL2 organism along with demonstration of consistent execution of these procedures each time they are performed.

Hazards analysis and critical control points (HACCP) is a risk-assessment tool that can be proactively used to identify and implement process controls that consistently and effectively prevent hazards from occurring. HACCP involves evaluation of critical procedural limits and determination of how they will be achieved routinely. Because it is essential that the backup inactivation procedures prevent the release of the BL2 organism outside of the fermentation suite, HACCP was selected as the risk-assessment tool to use to determine the appropriate preventative controls.


blog comments powered by Disqus

ADVERTISEMENT

ADVERTISEMENT

AbbVie/Shire Deal Officially Off
October 20, 2014
Amgen Sues Sanofi and Regeneron over Patent for mAb Targeting PCSK9
October 20, 2014
EMA Works to Speed Up Ebola Treatment
October 20, 2014
Lilly to Close Manufacturing Facility in Puerto Rico
October 17, 2014
BioReliance Introduces New Predictive Assays
October 17, 2014
Author Guidelines
Source: BioPharm International,
Click here