Managing the Quality Relationship for a Contractual Agreement: A CMO Perspective - The author describes an equation that can be used to define the Quality relationship between a contract manufacturing


Managing the Quality Relationship for a Contractual Agreement: A CMO Perspective
The author describes an equation that can be used to define the Quality relationship between a contract manufacturing organization and a client, including how to factor in both party's needs and regulatory commitments.

BioPharm International Supplements
Volume 25, Issue 3, pp. s40-s42

Contract manufacturing organizations (CMOs) occupy a special niche in the bio/pharmaceutical industry and therefore face problems not encountered by traditional bio/pharmaceutical manufacturing companies. One particular challenge facing CMOs is how to define the responsibility for Quality in a relationship. Which party, the contract giver or the contract provider, has which responsibilities? Although the answer may be straightforward for companies with their own manufacturing operations, it is quite complicated for a CMO. When defining ownership of "Quality," a CMO must consider the compliance needs and regulatory commitments for multiple clients. The CMO also must look at Quality as a function of product lifecycle—in a similar manner to how their clients would look at Quality if they were manufacturing the product themselves.


If one views the Quality relationship as a simple mathematical equation, it may look something like this:

where A is the CMO needs, B is the compliance needs, C is the client's needs, D is regulatory commitments, and E is defined as the elements of the Quality relationship. By analyzing this equation, it is clear that there are no constants, only variables. Each variable is based on the consideration of certain elements from each party in the relationship.

Variable A: CMO Needs. A CMO's needs are based on maintaining as much operational consistency as possible when managing internal and subcontracted resources. This approach enables cost management for the CMO and cost savings for the customer. Variable A should take into account the audit, testing, sourcing, and customer-specific requirements needed to manufacture the product. The CMO should make sure these requirements are included as part of the Quality Agreement. When defining auditing responsibilities, consideration must be given to determining the appropriate involvement of the client for internal, external, and regulatory audits and should be somewhat consistent between clients.

Testing requirements (e.g., final product, raw material, and environmental) should include what is required not only to manufacture the product, but also to maintain the environment in which the product is manufactured. For example, testing requirements might be traditional compendial testing, but may also include product-specific testing as defined by the client. In the case of a raw material, the CMO must consider whether the item is used in multiple products and whether it is available from a single or multiple sources. Consider this example: in some cases, the client may dictate the supplier of the component in question because it has an established relationship. In other cases, the CMO may have the more established relationship with the supplier. In such situations, the CMO, in conjunction with the client, must determine who will be responsible for providing the qualification and follow-up audits of that supplier. This type of scenario should be defined in the Quality Agreement so that there is little confusion between the parties. A well-drafted Quality Agreement can save a lot of confusion and duplication of effort on behalf of the client and contract provider and facilitate productive communication.

Variable B: compliance needs. Multiple customers, regulatory agencies, and standard-setting organizations influence compliance requirements maintained by a CMO. Each requirement needs to be implemented to accommodate the broad spectrum of these influences. Variable B of the equation defines the compliance needs for the manufacture of all products at the given facility. Company standard operating procedures (SOPs), customer SOPs, audit observations, and compendial requirements need to be considered in discussion with the client and the CMO. Clients should make every effort to understand their CMO's SOPs.

It is equally important for the CMO to make sure that its SOPs are robust enough to accommodate multiple clients' needs. It is difficult for a CMO with multiple clients to operate using duplicate SOPs for the same process or procedure. The CMO and the client should therefore spend a sufficient amount of time ensuring that the compliance needs of both parties are defined and met.

Similar to variable A, variable B also has an audit element to consider. In this case, the effectiveness and appropriateness of a CMO's audit program is considered. The audit program must meet the regulatory expectations for internal and supplier audits while also meeting the client's expectations on these points.

blog comments powered by Disqus



Baxter Initiates Voluntary Recall of Potassium Chloride Injection
September 17, 2014
PDA Announces Technical Report on Drug Shortages
September 9, 2014
European Commission Approves RoACTEMRA for Treatment of RA
September 9, 2014
FDA Releases Guidance Electronic Submission of Lot Distribution Reports
September 5, 2014
Infinity and AbbVie Collaborate to Develop Oncology Drug
September 5, 2014
Author Guidelines
Source: BioPharm International Supplements,
Click here