Raw Material Variability
It would seem that raw materials used in bioprocessing operations are a relatively straightforward factor given the overall complexity of commercial manufacturing. In fact, they give a surprisingly disproportionate large share of the headaches. The problem is variability. Variability is when an inconsistency creeps into the material, or some unforeseen change occurs that leads to an unexpected effect on the manufacturing process. It could be a change in a chemical or physical characteristic of the material; it could be an additional component (contaminant) or even a missing component.
Raw materials have a wide definition: cell-culture media; excipients; chemical additives; detergents; manufacturing process agents, for example, anti-foam agents or even product contact materials like the plastic used in disposable bags. Small changes can have a significant, measurable effect, and often it is difficult to determine root cause. Not all of the potential sources of variation are investigated or understood at the process development phase. Thousands of possible variables exist, and many have a trivial impact. The critical ones would, ideally, be investigated. In reality, commercial operations will experience the effects of unforeseen variability and will need to act accordingly.
Raw material variability may lead to quality compliance issues, process inconsistency, or bioprocess productivity problems. Many of these issues would be upstream in the cell-culture or fermentation step but could also be downstream in purification. The ‘blackbox’ nature of upstream processes makes things doubly difficult. Common examples would be out of specification for a product critical quality attribute (CQA), slower cell growth, low titer, and evidence of extraneous matter following visual inspection.
Fixing Variability in Raw Materials
Sometimes the supplier is a big company selling materials to many industries and biopharmaceutical manufacturing is a small part of their overall business. In this case, their willingness to help could be limited. Often a component of the material is a naturally occurring substance maybe derived from a crop or another (preferably non-animal) living substance. In this case, it might be extremely difficult to control variability due to environmental factors. Changing to a chemically defined material would be preferred but is not always possible for legacy products where the license has been submitted with detailed raw material and other bioprocess information.
Despite the courageous work done by the engineers and scientists, there is a rising tide of questions along the lines of ‘surely, there’s a better way?’ These investigations are expensive and energy sapping. Moreover, with increased regulatory expectations, it is difficult to claim ‘we are in control’. Health authorities want to see process understanding, and they want to know that supplier quality is suitably reliable.
A New Approach
The industry is now developing an additional approach, which seeks to make the external inbound raw material supply chain fit for purpose. At a recent BioPhorum Operations Group meeting, 17 companies pooled their knowledge and committed to a joint program of supply-chain improvement. Taken to its logical end point, the change envisaged is transformational. The following are four principles behind the transformation:
The biological molecule is often thought of as the value-adding element of drug substance, but unless the variability of each and every material that the cells come into contact during their creation is carefully considered and controls put in place, manufacturers might fall short of the mission.Simon Chalk is director of the BioPhorum Operations Group, email@example.com.