PEG Precipitation: A Powerful Tool for Monoclonal Antibody Purification
Efforts are ongoing to identify alternatives to packed bed chromatography to reduce the time and cost of processing high-titer product streams. Although many efforts focus on membrane adsorbers that directly replace columns of the same or similar chemistries, some older technologies are beginning to gain ground in recombinant protein manufacturing. One attractive alternative to chromatography is precipitation, which has been used in the plasma protein industry for many years.1 A simple method of precipitation involves titrating the process fluid to the isoelectric point of the protein that is to be precipitated.2 Lyotropic salts, such as ammonium sulfate, also have a long history of use in precipitation processes.3 Short-chain fatty acids, such as caprylic acid, are well known for their ability to precipitate DNA and host cell proteins (HCPs).4 Polyionic species also are useful precipitants for capturing a product of interest or removing contaminating proteins.5,6
Polyethylene glycol (PEG) has been used for product and impurity precipitation.7,8 It also can be combined with isoelectric precipitation to improve the efficiency of the separation.9,10 After precipitation, centrifugation or filtration can be used to perform solid–liquid separation.11 Although centrifugation is a well-established method to achieve this separation, washing the product pellet to remove impurities could be problematic, and it is not suited to a single-use process. Filtration—normal- or tangential-flow—requires more development, but washing the pellet is simpler, and it is readily adaptable to a single-use process.
In the present work, a product precipitation step was developed using PEG to recover a monoclonal antibody (MAb) from clarified PER.C6 cell culture media. Appropriate precipitation conditions were identified through the use of full factorial experimental designs. Two filtration steps were evaluated for the capture and washing of the precipitated product, and the superior method was scaled-up 10-fold. The total precipitation process resulted in yields of approximately 90% and HCP reduction of 1 LRV with no significant increase in the aggregate level of the redissolved MAb. Finally, the impact of the precipitation step on the subsequent cation exchange (CEX) capture step was investigated.
Materials and Methods Reagents
USP grade salts, Tween 20, hydrochloric acid, acetic acid, and sodium hydroxide were purchased from JT Baker (Phillipsburg, NJ). PEG was of reagent grade and purchased from JT Baker or EMD Chemicals (Gibbstown, NJ). All buffers were prepared using MilliQ-grade water (Millipore, Billerica, MA) and were filtered by 0.22-Ám filtration before use.
A human MAb (IgG1, pI = 8.3, 150 kDa) was produced at Percivia, LLC using a PER.C6 cell line. PER.C6 cells are human embryonic retinal cells immortalized by the adenovirus E1 gene, as described in US patent 5,994,128.12 The cells were cultured in a standard fed-batch process or the XD process, both using chemically defined media.13,14 The fed-batch media were clarified by sedimentation and depth filtration, and the XD media were clarified by the enhanced cell settling (ECS) method followed by depth filtration.15 During ECS, Silica-PEI resin was used to enhance cell settling and also reduce DNA and HCP.
Precipitation Condition Optimization
The conditions used to precipitate the MAb—PEG molecular weight, PEG concentration, and pH—were optimized by full factorial experimental designs using Minitab software (State College, PA). The pH of the clarified XD media was adjusted to the desired level with 2-M Tris in a 15-mL conical tube. The PEG was added as a 40% (w/w) stock solution to the desired final concentration. The tube was then centrifuged at 1,000g and the supernatant decanted. Finally, the pellet was redissolved in phosphate-buffered saline (PBS).
Pellet Capture by Depth Filtration or Microfiltration
Depth filtration was performed with various grades of filter media. Millistak+HC D0HC, C0HC, and X0HC were purchased from Millipore Corp. (Billerica, MA), and ZetaPlus 60SP02A was purchased from Cuno (Meriden, CT). Precipitation was carried out using a 40% (w/w) stock solution of PEG-3350 and the precipitated media was loaded at a feed flux of 50 L/m2 /h until all of the material was loaded or the transmembrane pressure (TMP) was 15 psid. The filters were then washed with 20–30 L/m2 of 20 mM Tris pH 8.5 + 14.4% (w/w) PEG-3350. After washing, 80 L/m2 of resolubilization buffer was passed through the filters at 100 L/m2 /h, and the permeate was recirculated through the device at 600 L/m2 /h until the A280 of the permeate pool was stable indicating complete MAb dissolution. Finally, any held-up product was recovered with a 20 L/m2 buffer flush and air blowdown of the filter module. In some tests, the filter media was subsequently washed with 85-mM acetate pH 5.3 followed by 1-M NaCl. Pressure and flow data were collected using a custom engineered system from ARC Technology Services (Nashua, NH).
Microfiltration was performed with a 0.22-Ám hollow fiber membrane from GE Healthcare Life Sciences (Piscataway, NJ). The PEG-3350 was added as a 40% (w/w) stock solution for the small-scale experiment and in powder form for the scale-up work. The feed flux was 710 L/m2 /h and the retentate and permeate were unrestricted. The precipitate was first concentrated 10- to 14-fold and then washed with three diafiltration volumes of 20 mM Tris pH 8.5 plus 14.4% (w/w) PEG-3350. Finally, the precipitate was redissolved in 85 mM sodium acetate pH 5.3 or 20 mM Tris plus 50 mM NaCl pH 7.5. Pressure, flow, and conductivity data were collected using a Slice 200 benchtop system (Sartorius, Gottingen, Germany) for small-scale testing and a SciPro system (SciLog, Middleton, WI) for the scale-up experiment.
Cation Exchange Chromatography
Toyopearl GigaCap S-650 was procured from Tosoh Bioscience (Montgomeryville, PA) in the Toyoscreen 5-mL format. This resin has been previously demonstrated as a high capacity capture step for MAbs.16 The column was equilibrated with 74-mM sodium acetate pH 5.3 and loaded to 90–95 mg-MAb/mL-resin using either clarified media or clarified and PEG-treated material, each adjusted to the same pH and conductivity as the equilibration buffer. The column was then washed with equilibration buffer and the antibody eluted with 50 mM sodium acetate pH 5.3 plus 90 mM NaCl.
The MAb concentration in media-containing samples was determined by analytical Protein A HPLC (Applied Biosystems, Foster City, CA). Aggregate levels were measured by size-exclusion chromatography (SEC) using a TSKgel G3000SWXL column from Tosoh Bioscience (Montgomeryville, PA), with peak detection by UV absorbance at 280 nm. HCP levels were quantified by a PER.C6-specific ELISA from Cygnus Technologies (Southport, NC). SDS-PAGE was performed with NuPAGE 4–12% Bis-Tris gels and staining was done with SimplyBlue SafeStain, both from Invitrogen (Carlsbad, CA).
Results and Discussion Precipitation Conditions
Pellet Capture by Depth Filtration
Pellet Capture by Microfiltration
Cation Exchange Chromatography
The ability to reduce the impurity burden so far upstream in the purification train is key to truncating the downstream process or replacing traditional chromatography with other single-use technologies. Lower impurity burdens can improve the loading capacity of flow-through membrane adsorbers and possibly virus filters, which are generally very expensive items in a process.
An added benefit is the ability to redissolve the antibody in a buffer that facilitates the subsequent unit operation. For example, cell culture media typically requires extensive titration and dilution or a UF–DF step to prepare for capture chromatography with a cation exchanger. Here, the precipitated antibody can be dissolved in equilibration buffer at high concentration, thus shortening the processing time. This can be important for products that do not tolerate long exposure to low pH/conductivity conditions. In the case of this particular antibody, the clarified media requires a more than two-fold dilution to be loaded onto a CEX column, whereas the redissolved MAb could be loaded directly at nearly two-fold the concentration of the unadjusted media. This is at least a four-fold reduction in the load volume, which can result in substantial time savings for modern, high-capacity CEX resins.
The authors would like to thank the Percivia protein and analytical sciences for assay support in this work and the Percivia upstream process development group for supplying the cell culture media.
PER.C6 is a registered trademark of Crucell Holland BV Corporation; XD is a registered trademark of DSM NV; and ECS is a registered trademark of DSM NV. All other brand names are trademarks of their respective owners.
MICHAEL KUCZEWSKI is scientist I, EMILY SCHIRMER, PhD, is scientist II, BLANCA LAIN, PhD, is a senior scientist, and GREGORY ZARBIS-PAPASTOITSIS, PhD, is a senior director, all in downstream process development, Percivia LLC, Cambridge, MA, 617. 301.8821, email@example.com
1. Cohn EJ, Strong LE, Hughes WL, Mulford DJ, Ashworth JN, Melin M, et al. Preparation and properties of serum and plasma proteins. IV. A system for the separation into fractions of the protein and lipoprotein components of biological tissues and fluids. J Amer Chem Soc. 1946;68(3):459–75.
2. Van der Wielen L, Hofland G, Ottens M, Gulobovic M, Witkam G-J. Manufacturing protein-based structures using a volatile acid. In: 224th National Meeting of the American Chemical Society. Boston, MA; 2002.
3. Habeeb A, Francis R. Preparation of human immunoglobulin by ammonium sulfate precipitation. Vox Sanguinis. 1976;31:423–34.
4. Wang J, Diehl T, Aguiar D, Dai X-P, Arunakumari A. Precipitation of process-derived impurities in non-Protein A purification schemes for antibodies. BioPharm Int. 2009 Oct suppl, Downstream Processing 2010: Embracing Innovation;4–10.
5. McDonald P, Victa C, Carter-Franklin JN, Fahrner R. Selective antibody precipitation using polyelectrolytes: A novel approach to the purification of monoclonal antibodies. Biotechnol Bioeng. 2009;102(4):1141–51.
6. Moya W, Jaber J, Moya W, inventors; Millipore Corp., assignee. Purification of Proteins. United States patent US WO/2008/079280. 2006.
7. Polson A, inventor; South African Inventions Development Corporation, assignee. Fractionation of mixtures of proteinaceous substances using polyethylene glycol. United States patent US 3415804. 1968.
8. Giese G. Polyethylene glycol precipitation of monoclonal antibodies and the impact on column chromatography. In: BioProcess Int. Raleigh, NC; 2009.
9. Thrash S, Otto J, Deits T. Effect of divalent ions on protein precipitation with polyethylene glycol: mechanism of action and applications. Protein expression and purification. 1991;2(1):83–9.
10. Ramanan S, Stenson R, Ramanan S, inventors; Amgen, assignee. Method of isolating antibodies by precipitation. United States patent US 2008/0214795 A1. 2008 2/13/08.
11. Venkiteshwaran A, Heider P, Teysseyre L, Belfort G. Selective precipitation-assisted recovery of immunoglobulins from bovine serum using controlled-fouling crossflow membrane microfiltration. Biotechnol Bioeng. 2008;101(5):957–66.
12. Fallaux FJ, Hoeben RC, Eb AJvd, Bout A, Valerio D, Fallaux FJ, Hoeben RC, inventors; IntroGene B.V, assignee. Packaging systems for human recombinant adenovirus to be used in gene therapy. United States patent US 5994128. 1997.
13. Golden K, Bragg C, Chon J. The XD process: development of a high titer process for PER.C6 cells. In: 21st Meeting of the European Society of Animal Cell Technology. Dublin, Ireland; 2009.
14. Chon J. Advances in platform fed-catch and XD production processes using the PER.C6 human cell line. Wilbio Waterside Conference; 2009 Apr 20–22; South San Francisco, CA.
15. Schirmer EB, Kuczewski M, Golden K, Lain B, Bragg C, Chon J, et al. Primary clarification of extreme-density cell culture harvests by enhanced cell settling. Bioprocess Int. 2010;8(1):32–9.
16. Lain B, Cacciuttolo MA, Zarbis-Papastoitsis G. Development of a High-Capacity MAb Capture Step Based on Cation-Exchange Chromatography. Bioprocess Int. 2009;7(5):26–34.
17. Yigzaw Y, Piper R, Tran M, Shukla AA. Exploitation of the adsorptive properties of depth filters for host cell protein removal during monoclonal antibody purification. Biotechnol Prog. 2006;22:288–96.
18. Milby KH, Ho SV, Henis JMS. Ion-exchange chromatography of proteins: the effect of neutral polymers in the mobile phase. J Chromatogr. 1989;482:133–44.
19. Gagnon P, Godfrey B, Ladd D. Method for obtaining unique selectivities in ion-exchange chromatography by addition of organic polymers to the mobile phase. J Chromatogr A. 1996;743:51–5.
20. Paithankar KR, Prasad KS. Precipitation of DNA by polyethylene glycol and ethanol. Nucleic Acids Research.1991;19(6):1346.