Considerations for Successful Upstream Process Development - Selection of the right cell line, culture medium, and bioreactor conditions is key to setting up the upstream portion of the biopharmaceuti

ADVERTISEMENT

Considerations for Successful Upstream Process Development
Selection of the right cell line, culture medium, and bioreactor conditions is key to setting up the upstream portion of the biopharmaceutical manufacturing process.

BioPharm International
Volume 25, Issue 7, pp. 48-50

BioPharm International speaks with Robin Ng, senior bioengineer in process development at Shire Pharmaceuticals, about the factors to consider when setting up the upstream portion of a biomanufacturing process.

BioPharm: What parameters influence the choice of a production system?

Ng: In general, an upstream process in biopharmaceutical production refers to the process of manufacturing the products of interest using biological entities, such as bacterial or animal cells. Because this process is aimed towards manufacturing, the properties or attributes of the desired products dictate the selection of a production system. In practice, the production system includes the selection of host cells, cell lines, and culture media, as well as the bioreactor system and its operating parameters. It is important to keep in mind that the development of the process is highly tied to the business needs, available resources, regulatory constraints, and project timeline. In addition, appropriate risk assessments need to be conducted and well documented throughout the development process to support rational decisions. Therefore, the development of each process is unique because of the specific constraints encountered during development, as well the advancement of the available technologies. Last but not least, it is always important to remember that process safety should be a top priority.

BioPharm: Can you briefly describe the process of choosing a cell line for production? What are the criteria for selecting a cell line?

Ng: In the cell-culture process, genetically-engineered cells are used to manufacture the proteins of interest. It is desirable that the commercial manufacture be initiated from a single Master Cell Bank (MCB). In the initial stage of development, cell cloning and subcloning are conducted following transfection and amplification. With recent advances in automation, the selection process is mostly conducted through a high throughput screening (HTS) system where millions of clones are screened and only a few clones are selected to move forward for further development.

The initial selection criteria for a cell line are typically high titer and robust growth. Obtaining a high-producing cell line can require additional time and resources. Therefore, it is important for the process developer to understand the needs and demands for the process. Whenever possible, the target market demand should be revisited to ensure reasonable and balanced process development efforts.

The secondary criteria in cell-line development include cell stability and product quality attributes. What a process developer should look for in cell stability is the ability for cells to produce the comparable protein levels (i.e., phenotypic stability) and maintain genetic integrity as the cells are continuously propagated into the production phase. In most development cases, many product quality attributes are still unknown during cell-line development. This remains a challenge in cell-culture process development because clinical data cannot be correlated with various product quality attributes during most of the development stage. Therefore, appropriate risk assessments based on scientific justification, process understanding, and similar processes are very important during early development.

It is also important to perform the final selection of candidate cell lines in a representative bioreactor system. The use of a representative bioreactor system or process is important to help predict process performance in a large-scale bioreactor system. In most companies, a baseline process will be used to screen the few final candidates cell lines.

It is always helpful to start with a good candidate cell line. Changing cell lines during development is usually undesirable because it leads to extensive comparability studies between materials generated. Knowing your endpoint is always a good start for developing your process.


blog comments powered by Disqus

ADVERTISEMENT

ADVERTISEMENT

GSK Fined in China Bribery Scandal
September 19, 2014
Guideline Delineates How to Implement GS1 Standards to Support DSCSA
September 19, 2014
Pandemic Vaccine Facility Dedicated in Texas
September 19, 2014
GPhA Supports Restricted Access Bill
September 18, 2014
Baxter Initiates Voluntary Recall of Potassium Chloride Injection
September 17, 2014
Author Guidelines
Source: BioPharm International,
Click here