Aseptic Processing: A Primer - NIBRT's Ray O'Connor provides an overview of aseptic processing. - BioPharm International

ADVERTISEMENT

Aseptic Processing: A Primer
NIBRT's Ray O'Connor provides an overview of aseptic processing.

BioPharm International
Volume 26, Issue 1, pp. 52-55

In this fifth part of a series of primers with training experts from the National Institute for Bioprocessing Research and Training (NIBRT), Operations Consultant Ray O'Connor discusses the basics of biopharmaceutical facility design and operation. NIBRT provides training, educational, and research solutions for the international bioprocessing industry in state-of-the-art facilities. Located in South Dublin, it is based on an innovative collaboration between University College Dublin, Trinity College Dublin, Dublin City University, and the Institute of Technology Sligo.

BioPharm: Why is aseptic processing crucial for injectables, such as vaccines and other biologic-based products?

O'Connor: Certain pharmaceutical products must be sterile as they're introduced to the patient by injection because this mode of drug delivery bypasses the body's natural defenses. Therefore, with biologics, there is an increased risk of infection being introduced to the patient. Sterile drug products can be manufactured using two techniques: terminal sterilization or true aseptic processing. Terminal sterilization usually involves heat or irradiation; however, quite a large proportion of vaccines and biological-based drugs can be destroyed by exposure to heat or irradiation, hence, the requirement to manufacture in an aseptic manner.

According to the FDA guidance for industry on sterilized drug products produced by aseptic processing issued in September 2004, in an aseptic process, the drug product and container/closure are subjected to sterilization methods separately, as appropriate, and then brought together. Because there is no process to sterilize the product in its final container, it is crucial the containers be filled and sealed in an extremely high-quality environment. Therefore, aseptic processing involves more variables than just terminal sterilization. Before aseptic assembly into a final product, the individual parts of the final product must be subjected to various sterilization processes.

Similarly, in the European Union, GMP guidelines state that the manufacture of sterile products is subject to special requirements in order to minimize the risk of microbial contamination and of particulate and pyrogen contaminant. So, as a result, much of the aseptic process depends on the scale of training and attitudes of the people involved.

It's particularly important that this type of manufacture strictly follow established and validated methods of preparation and procedure. Sole reliance for sterility or other quality aspects would not be placed on any terminal process or finished product testing. To summarize, aseptic processing is minimizing the risk of introducing any microbial contaminant into your product as you move it through the manufacturing process.

BioPharm: Aseptic processing and the term "fill/finish" are often used interchangeably throughout the industry. Are these two terms truly the same or are there unique steps for each?

O'Connor: Fill/finish is a discrete part of the manufacturing process. If you have an upstream or downstream process, that will be where you manufacture your active ingredient. Fill/finish is the filling and packaging part of this process. It comes after the product has been manufactured and is ready to be put into its final package container that the patient will see.

Aseptic processing refers to the various techniques that go into ensuring that the product is free of contaminants, thereby reducing the risk of infection to the patient. Aseptic processing, is the processing of drug components, drug product containers, and excipients in a manner that precludes microbial contamination of the final sealed product.


blog comments powered by Disqus

ADVERTISEMENT

ADVERTISEMENT

Baxter Initiates Voluntary Recall of Potassium Chloride Injection
September 17, 2014
PDA Announces Technical Report on Drug Shortages
September 9, 2014
European Commission Approves RoACTEMRA for Treatment of RA
September 9, 2014
FDA Releases Guidance Electronic Submission of Lot Distribution Reports
September 5, 2014
Infinity and AbbVie Collaborate to Develop Oncology Drug
September 5, 2014
Author Guidelines
Source: BioPharm International,
Click here