Efficient Multiproduct Process Development Case Study - Achieving multiproduct development within shortened timelines. - BioPharm International


Efficient Multiproduct Process Development Case Study
Achieving multiproduct development within shortened timelines.

BioPharm International
Volume 24, Issue 7, pp. 35-43

The pharmaceutical industry accounts for about $65 billion of annual expenditure in the US. Each day of product development costs approximately $1 million in expenses and at least $0.5 million in losses from not having yet commercialized that product. These costs are anticipated to nearly double between 2008 and 2012 because of the projected increase in the costs of human and material resources and of meeting regulatory expectations. As a result, improvements in process efficiency and delivery become of paramount importance for a viable business. Process development (PD), technological, and learning capabilities are even more critical for efficiency in commercializing complex biological products (1). In the current economic environment, additional pressure to increase efficiency arises from the need to advance multiple projects through the pipeline without increasing resources.

Figure 1: Two-cycle development process used in development of enzyme replacement therapies for rare genetic diseases. The typical pharmaceutical product development consists of three clinical development phases: Phase I (safety), Phase II (dose-finding), and pivotal trial Phase III studies, providing time for three-cycle sequential process development and the implementation of manufacturing changes at the initiation of each phase. For rare diseases, the clinical development is often condensed to two phases as depicted in this figure: a safety and dose-finding combined Phase I and II followed by a dose verification and pivotal trial PII/III study. The shortened time and limited number of clinical studies results in two-cycle overlapping process development, where the commercial process is developed during tech transfer and implementation of the Phase I process, and requires rigorous front-loaded process development activities.
The development of chronic therapies for rare diseases proceeds differently than the typical pharmaceutical development paradigm. A two-cycle approach (see Figure 1) is used for clinical development of therapies for rare diseases, which includes a safety and dose-finding Phase I and II clinical study followed by a pivotal Phase III clinical trial. Unlike a typical three-phase clinical development program (a Phase I safety clinical study, a Phase II dose-finding study, and pivotal Phase III trials) where manufacturing process changes are typically introduced at the initiation of each phase, the contrived breakpoints of a two-cycle development model create a higher need to perform PD in advance so that a commercial process can be introduced into the pivotal trial within approximately three years instead of the more common five to six years. Process changes are more difficult to introduce as there are not multiple clinical programs by which clinical experience with the new process can be gained. Introducing postcommercial changes which might affect product quality are even more difficult because of the limited number of patients with these diseases in whom clinical comparability trials can be conducted. The low patient numbers often result in the manufacture of a small number of batches to supply clinical studies and market needs, leading to limited data at the time of commercialization and limited time for the manufacturing group to become experts. The shortened overall development timelines and the small quantities needed result in a greater reliance on development-scale studies to support manufacturing, stability programs, and specifications at the time of licensure.

To manage the constraints and increase the efficiency of this two-cycle approach to product development of highly glycosylated proteins for rare diseases, the the following three steps were taken:

1. Technology platforms were developed that were linked to manufacturing capabilities and built on the knowledge gained with each enzyme replacement therapy (ERT) development. Developing process and analytical technology platforms for the highly glycosylated lysosomal enzymes transformed the initial trial-and-error development model to a more cost-effective strategy by establishing a small-scale model in the PD department to represent manufacturing scale.

2. A systematic and integrated approach to PD, called the PD life cycle, was applied to define the appropriate questions and issues to be addressed at the appropriate time within the clinical-development program. Starting the PD life cycle by determining the technical feasibility of product and process targets, followed by refining the targets and development plans based on the knowledge gained at each phase, enables the efficient use of resources and minimizes rework while improving the ability to handle multiple programs in a consistent manner.

3. Business processes were developed and applied for integrated PD planning, decision making, and communicating with stakeholders.

Through the use of the above mechanisms, knowledge gained from the commercialization of one product has increased the efficiency of development of the next product, resulting in continuous improvement. This article describes this three–pronged approach to ERT product development. These concepts can also be applied when developing other types of pharmaceutical products.

blog comments powered by Disqus



Compounding Pharmacy Issues Recall, But Challenges FDA Decision
July 22, 2014
AbbVie's Acquisition of Shire Could Save $8 Billion in Taxes
July 21, 2014
AstraZeneca Reveals Design for New Global R&D Center and Corporate Headquarters
July 18, 2014
AbbVie to Acquire Shire for $54.7 Billion
July 18, 2014
Particulate Matter Prompts Baxter's Recall of IV Solutions
July 17, 2014
Author Guidelines
Source: BioPharm International,
Click here